Loading...
282 MOTIF Appendix
Installing Optional Hardware
Appendix
Optional Plug-in Board
Installation
A variety of optional Plug-in boards sold separately let
you expand the voice library of your instrument.
The following types of Plug-in boards can be used with
your instrument.
• PLG150-AN • PLG150-PF • PLG150-VL
• PLG150-DX • PLG100-XG • PLG100-VH
The MOTIF provides three slots for the Plug-in board.
Therefore, up to three boards can be installed to
the rear panel.
nThe Vocal Harmony Plug-in board (PLG100-VH) can
installed only to slot 1.
nThe Multi part Plug-in board (PLG-100XG) can installed
only to slot 3.
nThe Single part Plug-in board can installed to any of
three slots.
1Turn the MOTIF power off, and disconnect the
AC power cord. Also, make sure to disconnect the
MOTIF from any connected external devices.
2Remove the large screw from the expansion bay
cover on the rear panel using a Phillips
screwdriver.
Keep the removed screw in a safe place. It will be used
when attaching the cover to the MOTIF again.
3Remove the ribbon cables that are to be connected
to the Plug-in board from the inside of the MOTIF.
The slots are assigned to the color-coded cables as
follows:
Slot 1 — Orange
Slot 2 — Yellow
Slot 3 — Green
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
OUTPUT
ASSIGNABLE OUTPUT
LMONO PHONES
ADINPUT GAIN
LRR RL
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
OUTPUT
ASSIGNABLE OUTPUT
LMONO PHONES
ADINPUT GAIN
LRR RL
MOTIF6 / MOTIF7
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
MOTIF8
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
OUTPUT
ASSIGNABLE OUTPUT
LMONO PHONES
ADINPUT GAIN
RLRRL
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
Slot 3
Slot 2
Slot 1
Cable for Slot 3
(Green)
Cable for Slot 2
(Yellow)
Cable for Slot 1
(Orange)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com