• RIP-2B. This format carries more information than RIP-1, sends the routing data
in RIP-2 format, and uses subnet broadcasting.
• RIP-2M. This format carries more information than RIP-1, sends the routing data
in RIP-2 format, and uses multicasting.
8. Click the Apply button.
Your settings are saved.
Router mode: Manage reserved LAN IP
If the access point/router is in router mode, you can specify a reserved IP address for a
device on the LAN subnet. Each time such a device accesses the access point/router’s
DHCP server, the device receives the same IP address.
Note: The information in this section and subsections does not apply if the access
point/router is in access point mode.
Router mode: Reserve a LAN IP Address
You can assign a reserved IP address for a device such as a computer or server that
requires permanent IP settings.
To reserve an IP address:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
User Manual118Manage the Network Settings
AC2000 802.11ac Wireless Access Point/Router WAC124