The IP address that is assigned to the device when it joined the access point/router network.
This address can change when a device is disconnected and rejoins the network.
Local IP Address
The IP address of the device at the other side of the VPN tunnel.Remote IP
The time that elapsed since the device connected to the access point/router.Connection
6. To refresh the information onscreen, click the Refresh button.
The information onscreen is updated.
Router mode: Monitor and meter Internet
If the access point/router is in router mode, you can enable traffic metering to monitor
the volume of Internet traffic that passes through the access point/router’s WAN port.
With the traffic meter utility, you can set limits for traffic volume, set a monthly limit, and
get a live update of traffic usage.
Note: The information in this section and subsections does not apply if the access
point/router is in access point mode.
Router mode: Start the traffic meter without traffic
You can monitor the traffic volume without setting a limit on the volume or connection
To start or restart the traffic meter without configuring traffic volume or connection
time restrictions:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
User Manual155Maintain and Monitor the Access
AC2000 802.11ac Wireless Access Point/Router WAC124
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com