The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > USB Storage > ReadySHARE.
The USB Storage (Advanced Settings) page displays.
6. In the Available Network Folders section, select the USB storage device.
Note: By default, the USB storage device that is connected is selected. We
recommend that you do not attach more than one USB storage device the USB port
(for example, through a USB hub).
7. Click the Edit button.
The Edit Network Folder window opens.
8. Change the settings.
9. Click the Apply button.
Your settings are saved.
Router mode: Approve a USB storage device
For more security, you can set up the access point/router to share only USB storage
devices that you approve.
To approve a USB storage device:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
User Manual181Share a USB Storage Device
Attached to the Access
AC2000 802.11ac Wireless Access Point/Router WAC124