8. Click the Apply button.
Your settings are saved, the Advanced Wireless Settings page displays again, and
the new schedule shows in the table for the radio for which you added the schedule.
The radio button for the schedule lets you select the schedule if you want to change
(edit) or delete it.
9. Above the table, select the Turn off wireless signal by schedule check box.
10. Click the Apply button.
Your settings are saved and the schedule becomes active. The WiFi signal is turned
off according to the schedule that you added.
Change the channel for a radio
The available WiFi channels and frequencies depend on the region or country and the
radio. The default is Auto, which enables the radio to automatically select the most
Note: You do not need to change the WiFi channel unless you experience interference
(which is indicated by lost connections).
Note: If you use multiple WiFi access points (APs), reduce interference by selecting
different channels for adjacent APs. We recommend a channel spacing of four channels
between adjacent APs (for example, use Channels 1 and 5, or 6 and 10).
To change the channel for one or both radios:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
User Manual211Manage the Advanced WiFi and
AC2000 802.11ac Wireless Access Point/Router WAC124