-Single address. Restricts the service to a particular computer. Enter the IP
address in the fields that become available with this selection from the menu.
•Service Type. Select the protocol (TCP or UDP) that is associated with the service
•Triggering Port. Enter the number of the outbound traffic port that must open
the inbound ports.
•Service Type. Select the protocol (TCP or UDP) that is associated with the inbound
connection. If you are unsure, select TCP/UDP.
•Starting Port. Enter the start port number for the inbound connection.
•Ending Port. Enter the end port number for the inbound connection.
9. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table
on the Port Forwarding / Port Triggering page.
Router mode: Change a port triggering rule
You can change an existing port triggering rule.
To change a port triggering rule:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
User Manual233Router Mode: Manage Port
Forwarding and Port Triggering
AC2000 802.11ac Wireless Access Point/Router WAC124