Reboot the access point/router from its local
You or NETGEAR technical support can reboot the access point/router from its local
browser interface, either locally or remotely, for example, if the access point/router
seems to be unstable or is not operating normally.
To reboot the access point/router from its local browser interface:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED.
The ADVANCED Home page displays.
6. In the AP Information pane ( in access point mode) or in the Router Information pane
(in router mode), click the Reboot button.
A pop-up warning window opens.
7. Click the OK button.
The access point/router reboots.
User Manual240Diagnostics and
AC2000 802.11ac Wireless Access Point/Router WAC124