Loading...
8. (Optional) In the LAN Setup section, select the Use This Interface ID check box and
specify the interface ID to be used for the IPv6 address of the access point/router’s
LAN interface.
If you do not specify an ID here, the access point/router generates one automatically
from its MAC address.
9. Click the Apply button.
Your settings are saved.
Router mode: Use Auto Config for an IPv6 Internet
connection
To set up an IPv6 Internet connection through autoconfiguration:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
6. From the Internet Connection Type menu, select Auto Config.
The page adjusts. The access point/router automatically detects the information in
the following fields:
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the access point/router’s WAN (or Internet) interface. The number after the
User Manual49Specify the Access Point/Router
Internet Settings Manually
AC2000 802.11ac Wireless Access Point/Router WAC124
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com