slash (/) is the length of the prefix, which is also indicated by the underline (_)
under the IPv6 address. If no address is acquired, the field displays Not Available.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the access point/router’s LAN interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
7. (Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name,
enter it here.
8. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for
the IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this
field. For example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.
9. Select an IPv6 Domain Name Server (DNS) Address radio button:
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns these addresses.
• Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IPv6 address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
10. In the LAN Setup section, select an IP Address Assignment radio button:
• Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCPv6 client function.
• Auto Config. This is the default setting.
This setting specifies how the access point/router assigns IPv6 addresses to the
devices on your home network (the LAN).
11. (Optional) In the LAN Setup section, select the Use This Interface ID check box and
specify the interface ID to be used for the IPv6 address of the access point/router’s
If you do not specify an ID here, the access point/router generates one automatically
from its MAC address.
12. Click the Apply button.
Your settings are saved.
User Manual50Specify the Access Point/Router
Internet Settings Manually
AC2000 802.11ac Wireless Access Point/Router WAC124