The BASIC Home page displays.
5. Select BASIC > Wireless.
The Wireless Network page displays.
6. Select the WiFi network (Wireless 1,Wireless 2, or Wireless 3).
7. In the Security Options section, select the WPA/WPA2 Enterprise radio button.
The WPA and WPA2 enterprise settings display.
8. In the WPA/WPA2 Enterprise section, enter the settings as described in the following
From the Encryption Mode menu, select the enterprise mode:
•WPA [TKIP] +WPA2 [AES]. This type of security enables WiFi devices
that support either WPA or WPA2 to join the access point/router’s WiFi
network. This is the default mode.
•WPA2 [AES]. WPA2 provides a secure connection but some older WiFi
devices do not detect WPA2 and support only WPA. If your network
includes such older devices, select WPA [TKIP] + WPA2 [AES] security.
Enter the interval in seconds after which the RADIUS group key is updated.
The default interval is 3600 seconds.
Group Key Update Interval
Enter the IPv4 address of the RADIUS server to which the WiFi network can
RADIUS Server IP Address
Enter the number of the port on the access point/router that is used to
access the RADIUS server for authentication. The default port number is
RADIUS Server Port
Enter the shared key (RADIUS password) that is used between the access
point/router and the RADIUS server during authentication of a WiFi client.
9. Click the Apply button.
Your settings are saved.
10. Make sure that you can reconnect over WiFi to the network with its new security
If you cannot connect over WiFi, check the following:
•If your WiFi-enabled computer or mobile device is connected to another WiFi
network in your area, disconnect it from that WiFi network and connect it to the
User Manual66Manage the Basic WiFi and
AC2000 802.11ac Wireless Access Point/Router WAC124