Loading...
INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
distance traveled from that point. In that
case, pushing the SELECT button
switches the display between the vari-
ous tripmeter and odometer modes in
the following order:
F-TRIP ODO TRIP 1 TRIP 2
F-TRIP
To reset a tripmeter, select it by push-
ing the SELECT button, and then
push the SELECT button for at least
one second while the display is flash-
ing. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically and the display will return to
the prior mode after refueling and trav-
eling 5 km (3 mi).
Clock
To set the clock:
1. Push the SELECT button and
RESET button together for at
least two seconds.
2. When the hour digits start flashing,
push the RESET button to set the
hours.
3. Push the SELECT button, and
the minute digits will start flashing.
4. Push the RESET button to set
the minutes.
5. Push the SELECT button and
then release it to start the clock.
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards “E” (Empty) as the fuel level
decreases. When the last segment
starts flashing, refuel as soon as possi-
ble. When the key is turned to ON, all
of the display segments of the fuel
meter will appear one after the other
and then disappear in order to test the
electrical circuit.
NOTE:
This fuel meter is equipped with a self-
diagnosis system. If the electrical circuit
is defective, all the display segments
1. Clock
2. SELECT button
3. RESET button
1. Fuel meter
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com