INSTRUMENT AND CONTROL FUNCTIONS
Dimmer switch “ / ”
Set this switch to “” for the high
beam and to “” for the low beam.
Turn signal switch “ / ”
To signal a right-hand turn, push this
switch to “”. To signal a left-hand
turn, push this switch to “”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Windshield position adjusting
To move the windshield up, push this
switch in direction (a). To move the
windshield down, push the switch in di-
When the key is turned to “OFF”, the
windshield will automatically return to
the lowest position.
Horn switch “”
Press this switch to sound the horn.
Engine stop switch “ / ”
Set this switch to “” before starting
the engine. Set this switch to “” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch “”
Push this switch to crank the engine
with the starter.
See page 5-1 for starting instruc-
tions prior to starting the engine.
The engine trouble warning light and
ABS warning light will come on when
the key is turned to “ON” and the start
switch is pushed, but this does not indi-
cate a malfunction.
Hazard switch “”
With the key in the “ON” position, use
this switch to turn on the hazard lights
(simultaneous flashing of all turn signal
1. Engine stop switch “ / ”
2. Hazard switch “”
3. Start switch “”
1. Windshield position adjusting switch “”