INSTRUMENT AND CONTROL FUNCTIONS
The accessory box is located beside
the meter panel.
To open the accessory box
1. Insert the key into the main switch,
and then turn it to “ON”.
2. Push the accessory box button,
and then open the accessory box
3. Turn the key to “OFF” to preserve
To close the accessory box
1. Fold the accessory box lid down.
2. Remove the key.
Do not place heat-sensitive items in
the accessory box. The accessory
box gets extremely hot especially
when the engine is running or is hot.
●Do not exceed the load limit of
0.3 kg (0.66 lb) for the accessory
●Do not exceed the maximum
load of 211 kg (465 lb) (CAL)
212 kg (467 lb) (U49) for the ve-
Adjusting the headlight
The headlight beam adjusting knobs
are used to raise or lower the height of
the headlight beams. It may be neces-
sary to adjust the headlight beams to
increase visibility and help prevent
blinding oncoming drivers when carry-
ing more or less load than usual. Obey
local laws and regulations when adjust-
ing the headlights.
To raise the headlight beams, turn the
knobs in direction (a). To lower the
headlight beams, turn the knobs in di-
1. Accessory box lid
2. Accessory box
3. Accessory box button
1. Headlight beam adjusting knob