PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a headlight bulb
This model is equipped with quartz bulb
headlights. If a headlight bulb burns
out, replace it as follows.
1. Remove panel D (if replacing the
left headlight bulb) or panel C (if re-
placing the right headlight bulb).
(See page 6-8.)
2. Disconnect the headlight coupler,
and then remove the headlight
3. Unhook the headlight bulb holder,
and then remove the defective
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
4. Place a new headlight bulb into po-
sition, and then secure it with the
Take care not to damage the follow-
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
Do not affix any type of tinted
film or stickers to the headlight
Do not use a headlight bulb of a
wattage higher than specified.
1. Headlight coupler
2. Headlight bulb cover
1. Headlight bulb holder
2. Headlight bulb
1. Do not touch the glass part of the bulb.