Loading...
Display Operations
Owner’s Manual
16
HPF ON menu
This shows the HPF parameters of all input ports (upper line: port name, middle line: HPF cutoff frequency, lower line: HPF
ON status), the port name of all output ports, and the status of the unit itself. In this menu you can set the HPF on/off status
of each input port.
Rio3224-D2 input ports
Rio3224-D2 output ports/status (upper right)
Rio1608-D2 input ports (left half) / output ports (lower right) / status (upper right)
HPF on/off settings
By turning the encoder with switch, you can turn on/off the HPF of the selected port. If the value is changed, the display
area of the currently selected parameter flashes. When you press the encoder, the setting is actually specified, and the
flashing stops. If you move the cursor while the parameter display area is flashing, the change is discarded and the
flashing also stops. In the same way, if you switch the menu selection while the parameter display area is flashing, the
change is discarded.
HPF F menu
This shows the HPF parameters of all input ports (upper line: port name, middle line: HPF ON status, lower line: HPF cutoff
frequency), the port name of all output ports, and the status of the unit itself. In this menu you can set the HPF cutoff
frequency of each input port.
Rio3224-D2 input ports
Rio3224-D2 output ports/status (upper right)
Rio1608-D2 input ports (left half) / output ports (lower right) / status (upper right)
HPF cutoff frequency settings
By turning the encoder with switch, you can change the HPF cutoff frequency of the selected port in the range of 20.0 Hz
to 600.0 Hz.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com