Loading...
Display Operations
Owner’s Manual
20
Status bar
The status bar at the right edge of the display shows icons to indicate the status of the Rio3224-D2 unit or Rio1608-D2 unit.
Icon
Six types of icons are shown.
The displayed position depends on the icon.
About HA Read Only
When operating a system containing a Rio2-native device such as a RIVAGE, CL, QL, or TF series unit, this function
allows the HA parameters to be changed only from the Rio2-native device or from R Remote.
The HA parameters will be read-only, and it will not be possible to operate the HA parameters or change the HA Read
Only setting from this unit.
When this unit starts up, this setting is always OFF.
This function is included in the setting items of a Rio2-native device, and is set when this unit synchronizes with the
Rio2-native device. If the connection between this unit and the Rio2-native device is broken while HA Read Only is ON,
the HA Read Only setting is maintained.
NOTE
The settings in the SETUP menu of this device can be changed even when HA Read Only is ON.
In order to turn HA Read Only OFF, you must perform an operation from the Rio2-native device, or power-cycle this unit.
Upper line
Shows the ERROR icon or the INFORMATION icon .
If both ERROR and INFORMATION have occurred, the ERROR icon takes priority and is shown.
If neither ERROR nor INFORMATION has occurred, nothing is displayed.
If ERROR or INFORMATION have occurred, the content is shown in the second line of the status display area
within each HA screen. For an explanation of the content, refer to “Messages” (page28).
Middle line
Shows the MUTE icon if muted (all ports together).
If the SECONDARY PORT parameter is set to DAISY CHAIN, the DAISY CHAIN icon is shown.
If muted (all ports together) and in addition the SECONDARY PORT parameter is set to DAISY CHAIN, the
MUTE icon takes priority and is shown.
If mute is cleared (all ports together) and in addition the SECONDARY PORT parameter is set to
REDUNDANT, nothing is displayed.
Lower line
Shows the LOCK status.
If panel lock is enabled, the PANEL LOCK icon is shown.
If HA Read Only is specified, the HA READ ONLY icon is shown to indicate read-only.
If panel lock is enabled and HA Read Only is specified, the PANEL LOCK icon takes priority and is shown.
If panel lock is not enabled, or if HA Read Only is not specified, nothing is displayed.
ERROR INFORMATION MUTE PANEL LOCKDAISY CHAIN
HA READ ONLY
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com