Support for Dante Domain Manager (V1.10 or later)
Firmware V1.10 or later is required for Rio3224-D2/Rio1608-D2 to enroll a domain with DDM.
INFORMATION – DANTE screen
When enrolling a domain:
The DDM indicator appears at the top of right side of the DANTE screen.
The R/W indicator or the R/O indicator also appears, depending on the LOCAL CONTROLLER ACCESS setting for the
* LOCAL CONTROLLER ACCESS = Read Write
* LOCAL CONTROLLER ACCESS = Read Only
When the local access is set to “Read Only,” changing the DANTE settings (UNIT ID, SECONDARY PORT) on the
Rio3224-D2/Rio1608-D2 unit will result in the following pop-up message.
When a DDM domain is enrolled, unregistering the domain will result in the DISC indicator appearing at the top right
side of the screen. In addition, when a DDM domain is enrolled without connecting to the DDM server, the DISC
indicator also appears.