Loading...
Specifications
Owner’s Manual 31
Specifications
General Specifications
*1. Total Harmonic Distortion is measured with 18 dB/octave filter @80 kHz
*2. Hum & Noise are measured with A-Weight filter.
*3. Crosstalk is measured with a 30 dB/octave filter @22 kHz
Sampling Frequency External
44.1 kHz
+4.1667%, +0.1%, –0.1%, –4.0% ±200 ppm
48 kHz
+4.1667%, +0.1%, –0.1%, –4.0% ±200 ppm
88.2 kHz
+4.1667%, +0.1%, –0.1%, –4.0% ±200 ppm
96 kHz
+4.1667%, +0.1%, –0.1%, –4.0% ±200 ppm
Signal Delay
Less than 1.7 ms
Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz.
Dante Receive Latency set to 0.25 msec
Frequency Response +0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz
+0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz
Total Harmonic Distortion*1
Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz
Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz
INPUT to OUTPUT, Input Gain= Min.
Hum&Noise*2 –128 dBu typ., Equivalent Input Noise, Input Gain= Max.
–88 dBu Residual output noise, ST master off.
Dynamic Range 112 dB typ., DA Converter,
108 dB typ., INPUT to OUTPUT, Input Gain= Min.
Crosstalk@1 kHz –100 dB*3, adjacent INPUT/OUTPUT channels, Input Gain= Min.
Dimensions (WxHxD)
and Net Weight
Rio3224-D2: 480 mm x 220 mm x 367.5 mm, 13.5 kg
Rio1608-D2: 480 mm x 132 mm x 367.5 mm, 9.6 kg
Power Requirements
(wattage)
Rio3224-D2: 120 W
Rio1608-D2: 72 W
Power Requirements
(voltage and hertz) 100-240V 50/60 Hz
Temperature Range Operating temperature range: 0 - 40°C
Storage temperature range: –20 - 60°C
NC value
Rio3224-D2
FAN MODE LOW: NC=20 / HIGH: NC=30
Rio1608-D2
FAN MODE LOW: NC=15 / HIGH: NC=25
Measurement position: 1 m from the front of the unit
Included Accessories Owner’s Manual, AC power cord, Dante Virtual Soundcard Token leaflet
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com