3DMC Reference Guide
7. Select and enter radio information and press Next.
Refer to the serial number/radio label on the
MC-R3 controller to determine the correct radio
type. The radio type selection must match the radio
contained in the MC-R3.
8. If you are using light bars, set LD-40 parameters
and press Next. See “LD-40 Light Bar Support” on
page 7-14 for more details.
9. If no light bars are in use, press Next to bypass the
LD-40 Setup screen.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com