Creating a 3D-MC² Machine Configuration File
P/N 7010-0911 8-9
9. Set radio information and press Next. Refer to the
serial number/radio label on the MC-R3 controller
to determine the correct radio type. The radio type
selection must match the radio contained in the
NOTICE: An incorrect radio configuration setting
will prevent the machine’s radio from connecting with
the Base Station. “No radio link” will display on the
Elevation Control Key.
If using light bars, set LD-40 information and press
Next. If no light bars are in use, press Next to bypass
the LD-40 setup.