Loading...
9
ASSEMBLY PROCEDURE
ASSEMBLY PROCEDURE
Tools
A 3mm crosshead screwdriver is required.
WIRING CABLES
1Using a crosshead screwdriver, remove the arm cover of the slit lamp.
2Turn the control lever of the slit lamp and bring the arm to the top. Turn the arm to the side so
that the holes of the base can be seen.
3Pass the LAN cable through the holes of the chinrest and base of the slit lamp.
CAUTION Turn off the power switch of the slit lamp, before connecting the cables.
To prevent short-circuiting, connect the cables correctly.
LAN cable
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com