P-32+ and P-32 Operator’s Manual P/N: 1001547-01
An electrical device which detects positive and negative change in lateral elevation using the grade controlled
side of the machine as a reference.
Function used to show the current elevation when in CAL mode. Also used in Laser Tracker operations in
conjunction with he Enter Button to move the Tracker receiver up and down.
Thickness Control Screws
The adjusting crank located at the rear of each side arm, used to control the angle of attack of the screed.
Tow Points (Pull Points)
The points where the side arms of the screed are attached to the Tractor unit.
A steel bar connected to the side arms of a screed for mounting the Slope Sensor.
A wire frame added to the Tracker that acts as a fixed target to compensate for rapid air temperature changes.
A rotating shaft and eccentric weight assembly mounted on the screed that produces vibration.
Long repeating changes in the elevation of the mat surface.
Adjustable region of measurement used by the Sonic Tracker II to determine if elevation correction is required.