Loading...
GC-35 Control Box Features and Setup
19
P-32+ and P-32 Operator’s Manual P/ N: 1001547-01
• • • • • •
GC-35 Control Box Features and Setup
This chapter describes the features and setup of your GC-35 Control Box including:
The buttons, grade adjustment knob, and color LCD screen on the GC-35 Control Box.
How to change settings, access information, and take readings using the Control Box.
A description of the Control Screen.
The menus available in the Performance Menu.
How to access, change settings, and apply features using the Performance Menu.
Control Box Features
The Control Box is your user interface to the Topcon P-32+ or P-32 System. The Control Box receives signals from
elevation sensors and an optional Slope Sensor, and uses these signals to determine if grade or slope corrections
are necessary. I f the paving requires a change in grade or slope, the Control Box sends a signal to the valve
controlling the tow point cylinder on the appropriate side of the paver to raise or lower, thus maintaining correct
mat thickness. You can control and monitor the slope and thickness of the mat using the buttons and display located
on the front panel of the Control Box.
Figure 32: GC-35 Control Box
Auto Indicator
Auto Button
Survey Button
Elevation Indicator LED (Green)
Slope Indicator LED (Yellow)
Slope/Elevation
Button
Jog Up/Down Buttons
LCD
Light Sensor
Power On/Off Button
Grade Adjustment Knob
Grade Adjustment Arrows
Menu Selection Buttons
Grade Indicator LEDs
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com