Loading...
GC-35 Control Box Features and Setup
Control Box Features
25
P-32+ and P-32 Operator’s Manual P/N: 1001547-01
Figure 43: Cross Communication I ndication Arrows
During Cross Communication, the Control Box that initiates the communication (primary) displays and controls
the settings of the secondary Control Box in the bottom half of the screen.
While in Cross Communication mode you can make the following changes to the secondary Control Box:
Switch the secondary Control Box into Automatic or Manual mode.
Adjust the slope or elevation values using the Grade Adjustment Knob.
Survey to On-Grade.
Select slope or elevation sensor.
Jog up/down.
1. Press and hold the Cross Communication Button (Figure 44).
Red double arrows display on the screen once cross communication with the secondary Control Box is
established. The bottom half of the display shows the settings of the secondary box.
Figure 44: Cross Communication Established – Secondary Control Box Control Enabled
2. While holding Cross Communication, view or make changes to the settings in the secondary box.
Primary Control BoxPrimary Control Box Secondary Control Box
2.5
2.5
0.15
0.15
Cross Communicaton
Indication Arrows
Cross Communication
- Press and Hold to
Make Changes to
Secondary Control Box
Cross Communication
- Press and Hold to Make Changes to
Secondary Control Box
Menu/Set
Unavailable for
Secondary Control Box
Cross Communicaton
Indication Arrows
Primary Control Box
Display Area
Secondary Control Box
Display Area
The Menu/Set Button and access to the secondary Control Box’s Performance Menu is disabled while
in Cross Communication.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com