Loading...
GC-35 Control Box Features and Setup
Performance Menu
36
P-32+ and P-32 Operator’s Manual P/ N: 1001547-01
Display
Display allows you to choose the amount of information available to the operator on the Control Screen. This
section describes the three selections available; Set Point, + Sensor, and Both Sides (Figure 62). You can also
check Display slope to allow the Slope Sensor to display the slope value even when it is in elevation mode ().
Also see “Control Screen” on page 29 for a description of the Control Screen.
Display Value Range: Set Point, + Sensor, Both Sides, and Display Slope
Factory Default: +Sensor
Figure 62: Display
Set Point
If you choose Set point as the display type, the Control Screen only displays the elevation or slope set point.
+Sensor
If you choose + Sensor as the display type, the Control Screen displays:
the elevation or slope set point.
the actual elevation or Slope Sensor reading.
Both Sides
If you choose Both sides as the display type, the Control Screen displays:
the elevation or slope set point.
the actual elevation or slope set point.
a live view of the secondary Control Box’s screen in the lower half of the screen.
– Elevation or slope set point
– Actual sensor readings
– Auto indication
– On-Grade arrow indication
Set Point +Sensor Both Sides
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com