Loading...
25
PREPARATIONS
PREPARATIONS
INSTALLATION
1Firmly hold the instrument at the position shown below and place it on the automatic instrument
table. For the adjustable instrument table, see "OPTIONAL ACCESSORIES" on page 112.
CONNECTING POWER CABLE
1Make sure the switch of the instrument is OFF.
2Tilt the body slowly so that the switch is on top and the power inlet at the bottom can
be seen.
CAUTION
When moving the instrument, two people should lift from the bot-
tom of the device.
One person lifting the device may cause harm to his back or
injury by falling parts. Also, holding areas other than the bottom
and holding the Terminal cover may cause injury, as well as dam-
age to the instrument.
To prevent damage and injuries, do not install the instrument on
an uneven, unsteady or sloped surface.
When setting an instrument on an instrument table, pay attention
not to injury a finger between the instrument and the table.
WARNING
Be sure to connect the power plug to an AC 3-pin receptacle
equipped with grounding. Connection with receptacle without
grounding may cause fire and electric shock in case of short-
circuiting.
CAUTION To avoid electric shocks, do not handle the power plug with wet
fingers.
Holding positions Holding the instrument
Terminal cover
POWER
POWER
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com