Loading...
56
BASIC OPERATIONS
BASIC OPERATIONS
OPERATION AFTER USE
OPERATION AFTER USE
1Tap the button on control panel in R/K measurement mode, and tap the
button on control panel in T/P measurement mode.
2Then, the confirming message of End operation is displayed in R/K measurement mode, and
the message of Air check/End operation is displayed in T/P measurement mode.
3Tap the button. Return the chinrest and measuring head to their last positions.
4The message of "Please don't turn the main switch off until the unit stops." is displayed.
5The operation is complete, then the message of "The unit stops completely. Please turn the
main switch off." is displayed.
6Turn the switch to off.
7If external device is connected, turn off the device.
8Unplug the power cable from a 3-pin AC inlet with grounding.
NOTE When external devices are connected to external I/O terminals, turn off the
power of these devices too. (If the switch is provided.)
NOTE When the instrument is not used for a long period of time, unplug the power
supply cable, and detach the cable connected to the external I/O terminal.
End
Air check/End
終了 キャンセル チェック 終了 キャンセル
Turn off the unit? Perform air check
or Turn off the unit?
CANCELCANCEL Air Check Turn offTurn off
R/K measurement mode T/P measurement mode
Turn off
POWER
POWER
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com