Loading...
76
OPTIONAL OPERATIONS
OUTPUT USING RS-232C
This instrument can output data to a PC, etc. via the RS-232C interface.
1Connect the interface cable to RS-232C OUT.
Refer to "CONNECTING EXTERNAL I/O TERMINALS" on page 26.
2Set up of data communication settings.
For details, refer to "DATA COMMUNICATION (COMM)" on page 90.
3Perform measurements.
4Tap the button on the control panel.
When output is completed, "RS-232C SUCCESS" is displayed on the screen.
INPUT USING USB
This instrument can input ID numbers from a bar code reader, etc. via the USB.
1Check the connection of USB IN.
For connection, refer to "CONNECTING EXTERNAL I/O TERMINALS" on page 26.
2Input ID numbers from the external device.
The inputted ID numbers are displayed on the screen.
OUTPUT USING LAN
This instrument can output data to a PC, etc. via the LAN interface.
1Connect the network cable to LAN OUT.
For connection, refer to "CONNECTING EXTERNAL I/O TERMINALS" on page 26.
2Set up of LAN connection settings.
For details, refer to "LAN CONNECTION (LAN)" on page 90.
3Perform measurements.
4Tap the button of the control panel.
Output is completed.
NOTE For explanation of messages during communication refer to the
"MESSAGE LIST" on page 99.
Print out
Print out
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com