Loading...
16-3
16 SELECTING MODE
*1 LANGUAGE selection varies depending on countries.
*2 Applicable only to the instruments with security function
*3 If you forget a password, the instrument needs repair to cancel the password. Please
contact Topcon or your local Topcon dealer.
16.2 How to Set Selecting Mode
<Example> : Setting unit in hPa, °F, NEZ MEMORY:ON
ACK MODE STANDARD /
OMITTED
Set the procedure of the communication with
external device.
STANDARD:Normal procedure
OMITTED: Even though the [ACK] is omitted from
the external device, the data is not
sent again.
GRID
FACTOR
USE G.F. /
DON’T USE
Select using GRID FACTOR in calculation of
measurement data.
CUT & FILL STANDARD /
CUT&FILL
In the layout mode, CUT & FILL can be displayed
instead of dZ.
ECHO BACK ON / OFF It is possible to output the data of echo back type.
CONTRAST
MENU
ON / OFF When the instrument is turned ON, it is possible to
display the screen which you can adjust contrast of
the display and confirm the prism constant (PSM),
non-prism constant (NPM) and atmospheric
correction value (PPM).
PASSWORD
*2
ON / OFF When the instrument is turned ON, the screen to
request the password will appear. *3
Operating procedure Operation Display
1While pressing [F2] key, turn power ON. [F2]
+
Power ON
2Press [F1](UNIT SET ) key. [F1]
3Press [F1](TEMP. & PRES.) key. [F1]
4Press [F2](°F) key, and press
[F4](ENTER) key. [F2]
[F4]
5Press [F1](hPa) key, and press [F4] (ENTER) key.
Returns to unit set menu. [F1]
[F4]
PARAMETERS 2
F1:UNIT SET
F2:MODE SET
F3:OTHERS SET
UNIT SET 1/2
F1:TEMP. & PRES.
F2:ANGLE
F3:DISTANCE P
TEMP. & PRES. UNIT
TEMP. = °C
PRES. = mmHg
°C °F ––– ENTER
TEMP. & PRES. UNIT
TEMP. = °F
PRES. = mmHg
hPa mmHg inHg ENTER
UNIT SET 1/2
F1:TEMP. & PRES.
F2:ANGLE
F3:DISTANCE
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com