Loading...
3-2
3 ANGLE MEASUREMENT
3.2 Switching Horizontal Angle Right/Left
Make sure the mode is Angle measurement.
3.3 Measuring from the Required Horizontal Angle
3.3.1 Setting by Holding the Angle
Make sure the mode is angle measurement.
Operating procedure Operation Display
1Press the [F4](
) key twice to get the function
on page 3. [F4]
twice
2Press the [F2](R/L) key.
The mode Horizontal angle Right (HR)
switches to (HL) mode.
[F2]
3Measure as HL mode.
zEvery time pressing the [F2](R/L) key, HR/HL mode switches.
Operating procedure Operation Display
1Set the required horizontal angle, using
Horizontal tangent screw
Display angle
2Press the [F2](HOLD) key. [F2]
3Collimate the target. Collimate
4Press the [F3](YES) key to finish holding the
horizontal angle.*1)
The display turns back to normal angle
measurement mode.
[F3]
*1) To return to the previous mode, press the [F4](NO) key.
V : 90°10'20"
HR: 120°30'40"
0SET HOLD HSET P1
TILT REP V% P2
H-BZ R/L CMPS P3
V : 90°10'20"
HL: 239°29'20"
H-BZ R/L CMPS P3
V : 90°10'20"
HR: 130°40'20"
0SET HOLD HSET P1
H ANGLE HOLD
HR: 130°40'20"
> SET ?
--- --- [YES][NO]
V : 90°10'20"
HR: 130°40'20"
0SET HOLD HSET P1
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com