Loading...
4-8
4 DISTANCE MEASUREMENT
The horizontal distance from the instrument to the
prism will be measured.
5Collimate point A0 using the horizontal motion
clamp and horizontal tangent screw.
Collimate
A0
6Show the relative elevation of point A0. []
7Show the slope distance of point A0.
zEach time pressing the [ ] key, horizontal
distance, relative elevation and slope distance are
shown in sequence.
[]
8Show N coordinate of point A0 or A1.
zEach time pressing [ ] key, N,E and Z
coordinate are shown in sequence.
[]
zTo return to procedure 4, press the [F1](NEXT) key.
zTo return to the previous mode, press the [ESC] key.
zTo select the Non-prism or Prism mode, press the [F3](NP/P) key after the step 3.
OFFSET-MEASUREMENT
HR: 110°20'30"
HD: 56.789 m
NEXT --- --- ---
OFFSET-MEASUREMENT
HR: 113°30'50"
HD: 56.789 m
NEXT --- --- ---
OFFSET-MEASUREMENT
HR: 113°20'30"
VD: 3.456 m
NEXT --- --- ---
OFFSET-MEASUREMENT
HR: 113°20'30"
SD: 56.894 m
NEXT --- --- ---
OFFSET-MEASUREMENT
HR: 113°20'30"
N : -12.345 m
NEXT --- --- ---
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com