Loading...
6-22
6 SPECIAL MODE (Menu Mode)
6.4.7 Setting RS-232C communication with external device
you can set the parameters for RS-232C communication with external device from parameters setting
menu .
The following parameters can be set.
ACK mode, CRLF and REC type are interlocked with the same items in the selecting mode.
Refer to 16 “SELECTING MODE”
Sample setting
STOP BITS: 2
Item Selecting items
Baud rate 1200, 2400, 4800, 9600, 19200, 38400
Character bit/Parity 7/Even, 7/Odd, 8/None
Stop bit 1, 2
ACK mode Standard, Omitted
CR,LF ON, OFF
REC type REC-A, REC-B
Factory setting Baud rate: 1200 baud rate, Character bit/Parity:7/Even, CRLF:OFF,
REC type: REC-A, ACK:Standard
Operating procedure Operation Display
1After pressing the [MENU] key, press the [F4](P
)
key twice to get the menu on page 2. [MENU]
[F4]
[F4]
2Press the [F1] key. [F1]
3Press the [F4] key twice. [F4] twice
4Press the [F1] key.
The data previously set is shown. [F1]
5Press the [F3] key to select STOP BITS.
The data previously set is marked. [F3]
6Press the [F2](2) key to select stop bit 2, and
press the [F4](ENTER) key. [F2]
[F4]
MENU 3/3
F1:PARAMETERS 1
F2:CONTRAST ADJ.
P
PARAMETERS 1 1/3
F1:MINIMUM READING
F2:AUTO POWER OFF
F3:TILT P
PARAMETERS 1 3/3
F1:RS-232C
P
RS-232C 1/3
F1:BAUD RATE
F2:CHAR./PARITY
F3:STOP BITS P
STOP BITS
[F1:1 ]
F2:2
ENTER
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com