Loading...
6-25
6 SPECIAL MODE (Menu Mode)
6.6.1 Input Start Point
To input the start point, carry out the following operating procedure.
Operating procedure Operation Display
1After pressing the [MENU] key, press the [F4](P
),
[F1], [F4]key to get the programs menu on page
2/2.
[MENU]
[F4]
[F1]
[F4]
2Press the [F3], [F1], [F1] key.
(Refer to “Input start point” on page 6-24.) [F3]
[F1]
[F1]
3Input coord N, E.
4Press the [ENT] key.
Input coord
[ENT]
5Input value data CHAIN, INTERVAL.
6Press the [ENT] key.
Input data
[ENT]
zFor [ROAD], in addition to the “Start Point” and “Road Data” input files, other files necessary for the
calculations are created. Consequently, if the free area of the memory reaches 10% or less, a
“MEMORY POOR” warning message is displayed. (In this case, the instrument can still be operated.)
zCHAIN and INTERVAL input range
-50,000mCHAIN+500,000m
0m<INTERVAL+5,000m
PROGRAMS 2/2
F1:AREA
F2:POINT TO LINE
F3:ROAD P
START POINT
N = 0.000 m
E : 0.000 m
--- --- [CLR] [ENT]
START POINT
CHAIN = 0.000 m
INTERVAL:100.000 m
--- --- [CLR] [ENT]
<SET!>
INPUT DATA
F1:START POINT
F2:H ALIGNMENT
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com