6-33
To setout the road, carry out the following operating procedure.
Operating procedure Operation Display
1After pressing the [MENU] key, press the [F4](P
),
[F1], [F4]key to get the programs menu on page
2/2.
[F4]
[F1]
[F4]
2Press the [F3], [F2], [F2] key.
(Refer to “Set out road” on page 6-24.) [F3]
[F2]
[F2]
3Input data. Input
data
4Press the [ENT] key. [ENT]
5Select offset.
(Example: RIGHT)
Press the [F2] key. *1)
[F2]
6Input the offset value.
7Press the [ENT] key.
The setout point coordinates are displayed.
Input
offset value
[ENT]
8Press the [F3](YES) key.
The distance to the setout point and the backsight
are displayed.
HR: Calculated horizontal angle of the layout point
HD: Calculated horizontal distance from the
instrument to the layout point
[F3]
9Press the [F1](ANG) key.
CHAIN: Layout point
HR: Measured (Actual) horizontal angle.
dHR: Horizontal angle to be turned to the layout
point = Actual horizontal angle - Calculated
horizontal angle.
Correct direction when dHR = 0°00'00"
[F1]
10 Press the [F1](DIST) key.
HD: Measuring (Actual) horizontal distance
dHD: Horizontal distance to be turned to the
layout point = Actual horizontal distance –
Calculated horizontal distance.
[F1]
PROGRAMS 2/2
F1:AREA
F2:POINT TO LINE
CHAIN=
--- --- [CLR] [ENT]
CHAIN=1200
--- --- [CLR] [ENT]
CHAIN:1200
> CENTER
LEFT RIGHT --- ENTER
CHAIN:1200
: RIGHT
= m
--- --- [CLR][ENT]
CHAIN:1200
N : 0.000 m
E : 0.000 m
>OK ? [YES][NO]
CALCULATED
HR= 60°00’00”
HD= 100.000 m
ANGLE DIST --- ---
CHAIN:1200
HR: 60°00’00”
dHR: 0°00’00”
DIST --- NEZ ---
HD* 100.000 m
dHD: 0.000 m
MODE NEZ NP/P NEXT