Loading...
6-34
6 SPECIAL MODE (Menu Mode)
6.6.7 Select a File
To set the coordinates to be used for the Occupied Point and Backsight Point, carry out the following
operating procedure.
6.6.8 Initialize ROAD data
To initialize the data, carry out the following operating procedure.
11 Press the [F3](NEZ) key.
The coordinate data is shown. [F3]
12 Press the [F4](NEXT) key to set next layout point. [F4]
*1) If not selecting offset, press the [ENT] key.
Operating procedure Operation Display
1After pressing the [MENU] key, press the [F4](P
),
[F1], [F4]key to get the programs menu on page
2/2.
[MENU]
[F4]
[F1]
[F4]
2Press the [F3], [F2] key.
(Refer to “Select a file” on page 6-24.) [F3]
[F2]
3Press the [F3] key.
4Enter the name of the file being used (or select it
from the list).
5Press the [ENT] key.
[F3]
Select a file
[ENT]
Operating procedure Operation Display
1After pressing the [MENU] key, press the [F4](P
),
[F1], [F4]key to get the programs menu on page
2/2.
[MENU]
[F4]
[F1]
[F4]
2Press the [F3], [F3] key.
(Refer to “Initialize ROAD data” on page 6-24.) [F3]
[F3]
3When the [F4] (YES) key is pressed, all ROAD
DATA with the exception of the coordinate data file
is erased.
Press the [F4] key. [F4]
N * 70.000 m
E : 50.000 m
MODE ANG NP/P NEXT
PROGRAMS 2/2
F1:AREA
F2:POINT TO LINE
F3:ROAD P
SETOUT
F1:OCC&BS
F2:SETOUT ROAD
F3:SELECT A FILE
SELECT A FILE
FN:__________
INPUT LIST --- ENTER
PROGRAMS 2/2
F1:AREA
F2:POINT TO LINE
F3:ROAD P
INITIALIZE DATA
ERASE ROAD DATA
>OK ? [NO][YES]
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com