6 - 17
6. SET MODE
Adjusting the Trend Recording Format (TREND, Dot-printing
This recorder prints in FIX or AUTO mode.
In FIX mode, dot printing is performed with a constant interval regardless of the chart
speed (approx. 20 sec).
AUTO mode is provided to prevent the chart from being damaged during repetitive dot
printing. This mode is useful for low chart speeds. The chart is protected from damage
because the printout timing changes with the chart speed (approx. 20 to 90 sec).
The initial value is ‘AUTO’. To set the trend recording mode, proceed as follows:
Key Operation Indication Discription
Press the [DISP] key for three seconds to enter the SET mode.
Select the  display using the  key, and press
the [ENT] key.
Specify AUTO or FIX using the  key. Then press the
 is displayed and the setting is completed. Press the
[DISP] key for three seconds to return to the OPERATION
NOTE If you press the [ESC] key in the middle of setting, the indication returns to the
 and already set data will be aborted.
6.7 Adjusting the Trend Recording Format
(TREND, Dot-printing model)