Loading...
40
PREPARATIONS BEFORE USE
2Remove the connector (on the lens barrel side) of the connecting cable. Pull up the connector as
sliding its end section (shadowed section as shown below) upward.
3Remove the connector (on the inverter side) of the connecting cable. Loosen the tightening ring
at the connector's end section and then remove the connector.
We recommend storing the removed connecting cable in the inverter's carry case.
4Loosen the eyepiece lens/beam splitter fixing knob on the operation microscope OMS-800 and
then remove the inverter from the microscope.
We recommend using a hexagonal screwdriver.
We recommend storing the removed inverter in the inverter's carry case.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com