Loading...
41
PREPARATIONS BEFORE USE
ADJUSTING THE 2ND ARM BALANCE: OFFISS, OFFISS Lite, Pro, Pro Lite
1While pressing the electromagnetic lock release switch, move the 2nd arm equally far up and
down.
If the arm moves upward too lightly, turn the 2nd arm balance adjustment handle clockwise(A).
The arm will move heavily.
A number will be displayed on the balance display window. The higher the number, the larger the
balance mass.
If the arm moves down too heavily, turn the 2nd arm balance adjustment handle counter-
clockwise (B). The arm will move lightly.
Installing or removing accessories will change the arm balance setting. Therefore, always
reset the balance in the vertical direction, according to the instructions above.
ADJUSTING THE 2ND ARM BALANCE: Standard
WARNING Hold the microscope operation handle while pressing the
electromagnetic lock release switch to unlock it. The arm may rotate or
move up and down suddenly, causing an injury.
WARNING Before installing the accessories, make sure all the arms are securely
locked. The 2nd arm may move suddenly, causing an injury.
WARNING Hold the microscope operation handle while pressing the
electromagnetic lock release switch to unlock it. The arm may rotate or
move up and down suddenly, causing an injury.
WARNING Before installing the accessories, make sure all the arms are securely
locked. The 2nd arm may move suddenly, causing an injury.
A
B
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com