Loading...
88
TROUBLESHOOTING
ERROR CODES
1Press the EXIT switch on the panel, and the error code is canceled.
An error code is canceled by pressing the EXIT switch. Write the error details of the error code
and contact your distributor.
Code Error Cause Remedy
E1 Centering error "NG" of centering is detected for one of
ZOOM, FOCUS and vertical rough
movement.
OFFISS
Pro
Press the EXIT
switch on the panel.
"NG" of centering is detected for ZOOM
or FOCUS.
Standard
E2 Illumination angle
changing error
Zero position detection error of
illumination angle change
OFFISS
Pro
Standard
E4 Front lens
initializing error
"NG" of initializing is detected for front
lens fine movement or variable
illumination aperture.
OFFISS
Press the EXIT
switch on the panel.
EP EEPROM error Data reading of EEPROM is not good. OFFISS
Pro
Standard
LP Lamp house error The lamp position detection switch is not
functioning properly or the lamp house
has not been set correctly.
OFFISS
Pro
Standard
FE Fan error The fan has stopped. If the instrument
continues to operate after the fan has
stopped, the power supply may
malfunction within about 1 hour.
OFFISS
Pro
Standard
EXIT
SPARE
MAIN
FOCUS XY
ZOOM
1
234
51
234
51
234
5
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com