Loading...
97
MAINTENANCE AND INSPECTION: Common
MAINTENANCE AND INSPECTION: Common
REPLACEMENT OF THE SPARE LAMP
Use the spare lamp to replace a burned-out lamp after operation following the steps below.
If LAMP A or LAMP B has burned out, replace the burned-out lamp with a new one following
the steps below.
1Turn off ( ) the power switch.
2Turn the lamp house unit and set it at the
position. Then pull the lamp house unit forward.
3The lamp house unit has two lamps ( and ).
Remove the terminal screws and terminal cord from
socket of the burned-out lamp.
WARNING Use only the specified lamp. Otherwise, overheating may cause a fire.
CAUTION Handle the lamp house with care during and immediately following
operation.
The lamp house heats up while in operation and can cause burns.
CAUTION The lamp is still hot just after turning off the illumination. Therefore, use
heat-resistant gloves, etc. to replace a lamp. Otherwise, you may be
burned.
NOTE Turn the lamp house unit until it stops with a "Click".
EXIT
SPARE
MAIN
FOCUS XY
ZOOM
1
234
51
234
51
234
5
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com