Loading...
Page 20
MENU SELECTIONS
PRIMARY MENU
Press INDEX to advance to the next menu item. Press UP ARROW or DOWN
ARROW to change the value in the display. Press ENTER to retain the value.
If StAt (Secondary Menu ) is On, the three program status menu items will appear.
ti Time remaining for current segment.
##ti Total run time for segment ##.
##SP Target Set Point for segment ##.
If StAt (Secondary Menu ) is OFF, the Primary menu operates as follows:
SP1 Set Point 1 Adjust, Control Point 1.
SP2 Set Point 2 Adjust (if equipped), Control Point 2.
Auto Auto/Manual Station, Select On or OFF.
On Output operation is automatic (normal operation).
OFF Output is controlled manually.
See Page 13 for operation of Auto/Manual Station Feature.
If Prog is OFF in the Secondary Menu, Prog (below) will not appear.
Prog Ramp/Soak Programmer Run/Hols function, Select run or HoLd.
run Ramp/Soak Programmer is in operation.
HoLd Ramp/Soak Programmer is on hold.
SECONDARY MENU
Hold UP ARROW & ENTER. Press INDEX to advance to the next menu item. Press
UP ARROW or DOWN ARROW to change the value in the display. Press ENTER
to retain the value.
If the control is not equipped with alarm, or if the alarm functions (AL) are turned OFF
or programmed as event (Eunt), ALLO and ALHi will not appear.
ALLo Alarm Low: The Low Alarm point is usually set below the Set Point. May not
appear depending on AL setting in Secure Menu.
ALHi Alarm High: The High Alarm Point is usually set above the Set Point. May not
appear depending on AL setting in Secure Menu.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com