Loading...
BASIC OPERATIONS
PREPARATIONS BEFORE MEASUREMENT
Turn ON the Power
1 Make sure the power cable is connected.
For connection, see “HOW TO CONNECT THE POWER CABLE” on page 14.
2 Make sure the instrument is in the no-patient condition and turn ON the
POWER SWITCH .
3 The Title screen is displayed, and then the Measurement screen is displayed.
Checking the Measuring Nozzle
1 Remove the measuring window cap.
2 Check if there is any foreign matter on and around the measuring nozzle. If any, turn
OFF the POWER SWITCH , clean it off and then turn ON the POWER SWITCH .
For cleaning, see “Cleaning the Nozzle and the Window Glass inside the nozzle” on
page 57.
Air Check
This machine is equipped with a function for checking the correct operations measure-
ment system inside the instrument.
1 Remove the measuring window cap.
2 Press on the control panel.
Air is ejected from the measuring nozzle and checking is done automatically.
3 Make sure “OK” is displayed on the monitor screen. The Menu screen should be dis-
played a few seconds afterwards.
29
BASIC OPERATIONS
Normal operation screen
Before measuring, check if there is any foreign matter on
and around the measuring nozzle. If any, it may enter and
damage the patient’s eye during the measurement.
CAUTION
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com