Loading...
MEASUREMENT UNDER AUTO MODE
Setting the Measurement Mode
The initial status of the measurement mode is AUTO, upon turning the power ON.
1 Return to the Measurement screen.
2 Press on the control panel and change the measurement mode display to
AUTO.
Setting the Measuring Range
In this machine, the measuring range can be switched between 0-30 and 0-60.
Normally, the 0-30 range is used, but if the patient's intraocular pressure is high, switch
it to 0-60. The initial status of the measuring range is 0-30, upon turning the power ON.
1 Return to the Measurement screen.
2 Press on the control panel and make the measuring range display 0-30.
33
BASIC OPERATIONS
A
djust the height of the automatic instrument table so that
correct measurement values can be obtained by allowing the
patient to undergo measurements in a comfortable position.
Make the patient relaxed so as to secure correct measure-
ment values; make sure the patient does not hold his breath
or remain tense.
MEMO
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com