Loading...
12
Name
Description
Detector window
The sensor of this instrument. Light should be uniformly distributed over
whole surface of the detector window.
Display panel
Various kinds of information such as measurement and measuring
condition is shown on the display panel.
Response switch
The response time can be changed. Select either FAST’’ or SLOW
according to the target light source.
Response switch
Range
Response speed (90%)
1
About 60 ms
2
About 6 ms
3
About 0.6 ms
4
About 0.6 ms
5
About 0.6 ms
6
About 0.6 ms
SLOW
1 - 6
About 4 s or less
Hold switch
By pushing this hold switch during measurement, Measurement is
paused and readout is fixed.
USB connector
This connector is used to connect the instrument to PC in remote mode.
Connecting PC ‘1.3.4 Connecting PC’
Tripod screw
A screw hole to fasten the instrument to a tripod.
Specification : 1/4-UNC (depth 5mm)
Keyboard
This keyboard is to select functions and to input numeric value.
Power switch
Power switch for this instrument.
External power
Connector
Connector for designated AC adapter (optional accessory).
Request
Use only specified screws when using the tripod screw and screw holes for
jig attachment. Do not tighten the screws any more than necessary. Doing so
might cause internal breakage.
Names and functions of keyboard
MANUAL RANGE
09 switch
SET switch
C.C.F.switch
cd switch
switch
(Decimal point switch)
(START/STOP switch)
(CAL. switch)
SHIFT switch
AUTO / MANUAL
switch
INV.switch
lx switch
lxh switch
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com