Loading...
30
7. APPLIED OPERATION AND SETTING OF VARIOUS FUNCTIONS
It is possible to set grade for the laser beam and various functions from the menu screen.
There are two methods to set grade on the laser beam: 1) direct entry of the grade value for the
X axis, and 2) matching to set grade on laser beam according to the slope of the ground on site.
How to enter grade value
Grade can be set in the X axis direction as shown below.
Grade can be set in the range indicated below.
7.1 Setting Grade
Single axis
Grade range:
X: –15% to +15%
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com