7. APPLIED OPERATION AND SETTING OF VARIOUS FUNCTIONS
Matching Mode (Manual Slope)
This mode is used to align the grade of the laser calibration to the worked grade.
1Horizontally rotate the laser beam of the RL-SV1S set
up at the standard height. (X+0.000%)
2Adjust the height of the LS-80L installed on the pole
and align the standard position of the LS-80L with the
laser beam and fix.
3Set up the LS-80L in step 2 on the grade surface.
4Using the sight, roughly align and set the position of
the RL-SV1S on top of the tripod to the direction of the
5Press the key.
6Press the key on the Matching Mode (SLOPE)