7. APPLIED OPERATION AND SETTING OF VARIOUS FUNCTIONS
4Press the key to enter the Line Control Mode.
5Confirm that auto leveling is complete and that the laser beam is emitting. Press either of
key once and the laser beam will move in the direction of the key to begin search.
The key cannot be used until auto leveling is complete and the laser beam starts
6Pressing either of key pressed in step 6 again will stop the movement of the laser
beam. If neither of key is pressed, the laser beam will return to the central area.
7Press either one of the key to move the beam right or left until it is precisely
aligned to reference point B. The speed of laser beam movement will change according to
the duration of time the key is being pressed. (The speed will change from low to
is flashing: in the Line Control Mode.
It is possible to adjust the laser beam with
key. When a certain amount of time has
passed after the key operation, the light that
was flashing will remain lit. The laser beam
cannot be adjusted when the light is on.
LEVEL is flashing : performing auto leveling in the vertical