Loading...
Chapter 3 – Athene Setup
25
lAverage weight: Sets whether the average weight is visible on the
INFO screen.
lInfo weight: Selects whether the INFO page is based on theorical
weight (rotations of floor) or the weight reduction from the load
cells.
Loadcell correction:
lCorrection span: Amount the calibration factor can change by after
each dynamic calibration.
lMin static weight: Weight of product that must be spread during a
static test.
lDynamic time: How often a dynamic calibration is made.
lDynamic weight: Weight of product that must be spread during
each dynamic calibration.
lStart delay: Delay at the start of each new load before dynamic
corrections are made.
lSteady weight: % change that is allowed each second before weight
reading is considered unstable.
lHeadland delay: Delay when the machine is switched in to work
before dynamic corrections are made.
lCal factor delay: Pause time between the previous dynamic
correction being made and the new correction starting.
lDynamic fill weight: When the hopper weight increases by this
value it is considered re-filled.
lCorrection span fast: Amount the calibration factor can change by
if weight is below 'Fast empty point'.
Overload log: A list showing each time the weight in the spreader went
over the maximum permissible load.
Diagnostics menu
The Diagnostics menu provides a method to view the following:
lChannels: Shows the current forward speed, target floor speed and
current floor speed.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com