CAUTION - USE OF THIS PRODUCT MAY INDUCE AN EPILEPTIC
SEIZURE IN THOSE PRONE TO THIS TYPE OF ATTACK.
CAUTION - OBJECTS VIEWED WITH THIS PRODUCT MAY
APPEAR TO BE STATIONARY WHEN IN FACT THEY ARE
MOVING AT HIGH SPEEDS. ALWAYS KEEP A SAFE
DISTANCE FROM AND DO NOT TOUCH THE TARGET.
CAUTION - THERE ARE LETHAL VOLTAGES PRESENT
INSIDE THIS PRODUCT. REFER TO THE SECTION ON LAMP
REPLACEMENT BEFORE ATTEMPTING TO OPEN THIS
CAUTION - DO NOT ALLOW LIQUIDS OR METALLIC
OBJECTS TO ENTER THE VENTILATION HOLES ON THE
STROBOSCOPE AS THIS MAY CAUSE PERMANENT
All descriptions in this manual apply to both the battery powered strobe and
AC mains powered strobe except where noted.
The strobe is a sophisticated instrument with many features, yet remains
simple to operate. Use only the features required for your application. The
strobe’s internal microprocessor and digital encoder knob ensures precise
settings and measurement. Each Strobe comes with a NIST Traceable
Certificate of Calibration.
The strobe stores and recalls six user programmable flash rate settings
and the last used settings in non-volatile memory so that the strobe
“remembers” all the settings when the power is turned off.
1.1 Direct Digital Synthesis
“Direct Digital Synthesis” is the method by which the strobe’s internal
microprocessor generates all the signals required to set internal flash
rates. In analog stroboscopes, these values are adjusted using a single
or multiple turn potentiometer (knobs) and these generally lack sensitivity
R-115 Charger 115 Vac 50/60 Hz (14 hour) for battery operated
R-230 Same as above except 230 Vac 50/60 Hz
HHT32-SPC Splash proof Protective Cover for Battery Powered Strobe
L-1903 Digital Stroboscope replacement lamp.
HHT20-ROS Remote Optical Sensor with 8 ft. cable for Stroboscopes
HHT-RT-5 Reflective tape.