Loading...
10
Schedules
About
Schedules
The system provides up to 24 end-user schedules (programmable by master/installer only), which can
control various types of events.
Each schedule causes a defined event to start and stop (when appropriate) at a specified time.
Schedules can be set to automatically repeat at various intervals and set for random starting, if desired.
Creating Schedules
1. System Master Code + [#] + [6] [4]
1 DISARMED
READY TO ARM
2. Enter a 2-digit schedule number from 01-24.
Press [] to continue.
ENTER SCHED NO.
00=QUIT 00
3. Enter the desired 2-digit event number from the following list.
00 = remove the scheduled event
01 = turn a programmed device on or off
02 = set a user access schedule for one or more users)
ENTER EVENT
03 = send “child-not-home” report; see Child Not Home notes below
04 = automatically arm the system in STAY mode at a specified time (cannot be used if a common area exists)
05 = automatically arm the system in AWAY mode at a specified time (cannot be used if a common area exists)
06 = automatically disarm the system at a specified time
07 = Display the word “REMINDER” at a specified time
08 = Disarm Time Window (system can be disarmed only during this time period; Exception: if a burglary alarm occurs,
the system can be disarmed outside the scheduled time window)
Press [] to continue.
4. For event number “01,” enter the 2-digit output number (01-18) associated with this
schedule. Otherwise, this prompt is skipped.
Press [] to continue to the “Start” prompt below.
DEVICE NUMBER
XX
5. For event number “02,” enter the 1-digit access group number (1-8). Otherwise, this
prompt is skipped.
Press [] to continue to the “Start” prompt below.
GROUP NUMBER
X
6. For event numbers “03-07,” enter the partition number to be armed or disarmed.
Otherwise, this prompt is skipped.
0 = arm all; 1 = partition 1; 2 = partition 2; 3 = partition 3
Press [] to continue to the “Start” prompt.
PARTITION
X
7. Enter the event’s start time and days of week: Hour = 00-23; minute = 00-59
Days = Position the cursor under the desired days using the [] key to move
forward, then press “1” to select the day(s). Press [] to continue.
START SMTWTFS
HH:MMAM 1000000
8. For events 04 or 05, enter the desired amount of time, 01-15 minutes, the system
should warn of impending arming. The system beeps once every 30 seconds to alert
users that arming will soon occur. Otherwise, prompt is skipped.
Press [] to continue.
WARNING DELAY TIME
00
9. Enter the event’s stop time and days of week. Refer to step 7 for available entries.
Press [] to continue. STOP SMTWTFS
HH:MMAM 1000000
10. Enter the desired repeat option.
0 = no repeat; 1 = repeat schedule weekly; 2 = repeat biweekly (every other week)
3 = repeat schedule every third week; 4 = repeat schedule every fourth week
e.g., To make a schedule that happens everyday you would select all days with a
repeat count of 1.
NOTE: Schedules run sequentially from Sunday to Saturday and reset on Sunday. If
repeat count is 0, only those events scheduled from the day the schedule is set to
Sunday will occur. Events scheduled after Sunday will be ignored.
REPEAT OPTION
0-4 X
11. Select the randomize option, if desired: 0 = no; 1 = yes
If selected, the schedule times will vary within 60 minutes of the “hour” time. For
example, if a schedule is set to start at 6:15, it will do so the first time 6:15 arrives,
but on subsequent days it will start anytime between 6:00 and 6:59
This feature is typically used for lighting control to make an unoccupied facility
appear occupied during extended absences.
Press [] to return to the ENTER SCHED No. prompt.
RANDOMIZE
0=NO 1=YES X
Child-Not-
Home Paging
Y
ou can program a schedule that causes a pager report to be sent to Pager 1 phone number if the system
is not DISARMED by the scheduled time (see event “03”). The message sent is: 7777777 .
For example, a working parent might want a message to be sent to a pager if their child did not arrive
home from school and disarm the system by a certain time.
NOTE: Your installer must program the control for pager reporting before you can use the child-not-home
scheduling option (installer must program pager number and report options).
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com